24'' extra high moldboard allows you to move a large volume of material at once
Weight box over wheels for optimal control
Set of 5-bolt standard implement gauge wheels to help regulate cut and achieve uniform depth
Attaches easily to any tractor with a standard drawbar
Simple hydraulic control of the gauge wheels (3-8 hydraulic cylinder and lines with pioneer style hookups not included on base models)
Unlike conventional box scrapers, the RB Series Box scrapers have a set of gauge wheels mounted at the rear of each box. These wheels help to regulate the amount of cut, making it easier and faster to achieve a more uniform depth.
A long tongue with the pivoting drawbar attachment keeps the box scraper further back behind your tractor. This way, when your tractor goes over a bump, it does not translate into your scraper also moving up and down, resulting in a much smoother finish
Braces within the main box provide extra structural support, strength and durability
Hydraulic cylinders, hoses and the pioneer style hookups are not included on the base models of our box scrapers, as many farmers have cylinders lying around. If you would like your scraper to come ready for use, we would be happy to add a 3-8 hydraulic cylinder, lines and all hookups for you
A pivoting draw-bar style hookup is easy to attach, and allows the box scraper more freedom to move independently of the tractor, making it easier to achieve a uniform spread
Back view of a 10' Box Scraper
Details like the hose keeper make our box scrapers well thought out and simple to use
Hydraulic controls mounted to the pivot point allow you to set thebox to the desired depth
A weight box mounted between the gauge wheels allows you to add extra weight if needed. You can add poured concrete, or use weight than can be removed such as bricks or cinder blocks
RB 1000 Box Scraper - 10' scraper with a 24'' moldboard and a 3-8 hydraulic cylinder controlling the set of gauge wheels
RB Series Box Scrapers are available in 4', 6', 8', 10', and 12' widths.
An 8' scraper was used to help refurbish roads at a wind turbine farm in Northeastern Colorado. Washouts were up to 8" deep (see before picture). We reclaimed 16' of roadway and rebuilt washout areas (see after picture)
